-
-
RA few months ago I fired an ASM that was loaded in 2018 when I was still in MN. All chambers fired like normal. It was loaded with...
-
RA more common occurrence. I can't find something I know I have somewhere. Got too much stuff accumulated over too many years. Anyway...
-
Rrodwha reacted to Captain*kirk's post in the thread An interesting way to prevent loading lever drop... with
Like.
That's pretty clever! @45 Dragoon, you paying attention? -
Rrodwha replied to the thread An interesting way to prevent loading lever drop....Looks well beyond my capabilities and those of the tools I own. If working on the spring’s edge didn’t fix it I’d probably have a...
-
Rrodwha reacted to .38 Special's post in the thread An interesting way to prevent loading lever drop... with Like.
I've had a roughly 50 percent success rate with filing the latch. I probably am not completely competent at it - but I do have a...
-
Rrodwha replied to the thread An interesting way to prevent loading lever drop....Yeah, fixing the spring latch seems to work most of the time and is such an easy thing to do. Gotta be able to shoot all 6 with full...
-
RMy interpretation of a long hunter knife. I made it out of an old gang saw blade and it has some pitting but I like the look of it and...
-
Rrodwha replied to the thread An interesting way to prevent loading lever drop....One has to depress that little screwed in bar along the plunger? Interesting!
-
RI believe that was Richard's test (SSB73Q). He did a whole lot of home testing with very interesting results. He is still a member over...
-
Rrodwha replied to the thread Cutting Aluminum Cans.I’m sitting on probably 9 tins of Rem #10s but I don’t like these shortages we see periodically!
-
RPowderInc has them others do as well. Prices are higher than you are used to but welcome to Bidens world…
-
Rrodwha replied to the thread Cutting Aluminum Cans.Are caps once again hard to find? If so how long has it been going on? And is there a light anywhere to be seen?
-
RI just push the point of the scissors through the side of the can below the top. Then begin cutting the caps off. Once both ends are off...
-
RI don't know what zhears are but a pair of medical utility scissors don't cost much and will cut anything from paper to coins and 1/4...
-
RI use a pair of "scissors" called Zhears that are heavy duty and serrated. They will cut through some stuff
-
-
Loading…
-
Loading…
-
Loading…