RKRCPA
Latest activity Postings Images About
-
-
RKRCPA reacted to Bill_in_TR's post in the thread How to initially choose a powder when starting out? with
Like.
With all due respect I don't understand the logic of this. W231 has been popular for a long long time. That would seem to take it beyond... -
RKRCPA replied to the thread How to initially choose a powder when starting out?.I agree with this. 9mm has been around long enough that there are "standard" loads using "standard" powders. Start there. Unless you...
-
RKRCPA replied to the thread My favorite 357 All Steel Revolver.Speed Six
-
250 gr WFN from CPC, over +/- 14.0 gr 2400 yields a nice deer/hog load at about 1200 fps
-
RKRCPA reacted to Starter52's post in the thread Do you decrease potential firearms purchases because of Form 4473 & FFL interaction? with Like.
Nope. Doesn't matter to me.
-
Just a word or two about .41 Magnum bore & throat tolerances: IIRC, Brian Pearce noted in one of his excellent articles, that he'd...
-
RKRCPA replied to the thread New Model Ruger Black Hawk.Ruger only loads are meant for large frame revolvers only. Do not use higher pressure loads in the mid-frame Blackhawk or the New Vaquero.
-
Got Dies!!!! 1/2 way in the .41 Mag Club
-
RKRCPA replied to the thread Clip draw for J frame?.I've been using an original Barami Hip Grip for a very long time. Simply disappears under a t-shirt just behind the hip.
-
My SRH above is about 3.5lbs. No rifle is as light and compact as that. If it were, it would be too light to shoot worth a crap. Not the...
-
RKRCPA replied to the thread Handloader #337's 23K psi 45 Colt Loads.Here's the +P listing from #275
-
Actually, both the nickle AND the lock bothered me…. But that’s just personal preference. I think S&W needs to make a 658… a stainless 58!
-
RKRCPA replied to the thread Horvath Lil Ruger.Here's a link to the article on sixguns.com http://www.sixguns.com/range/horvath.htm
-
-
Loading…
-
Loading…
-
Loading…