-
-
mdi replied to the thread 148 gr DEWC.FWIW; Any time there is a fit issue, start diagnosis by measuring the offensive round. All diameters, lengths, etc. looking for anything... -
Ditto to what’s been posted. Sorry for your loss. I have found .40S&W to be a very forgiving cartridge. I load as fast as Ramshot...
-
mdi replied to the thread New to me gun/caliber.Woo Hoo! The bug has bit again. I have reloaded lots of 9mm and 45 ACP so I figgered 40 S&W would be fine to reload. I have some W231 so...
-
I like 180 Gr bullets at 950ish FPS. My favorite is 5.0 Grs old W-231. Very accurate, nice recoil impulse. Any medium speed powder will...
-
It's been a bit over a year since I've done any reloading (wife sick and passing away) and a couple weeks ago decided to get back to it...
-
No you cannot I load both 9mm and 38 super. 9mm is a tapered cartridge 38 super is not and is considered a straight wall cartridge. I...
-
Have you considered the possibility that this might be related?
-
mdi replied to the thread A new monopoly?.I agree with A.E. Newman; "What, me worry?"
-
I do it in my head, have a real good idea, don't need exact numbers.
-
Is this a generic question or are you loading one or a few particular calibers? Either way, #3 is all I have, I am reluctant to show...
-
Dobedo, Livelife & CQB45ACP- I am looking for load data, not cost analysis
-
That is what the fine print about “starting loads” and “working up” is for. Given caliber, powder, and bullet weight, but not your...
-
Bulges above the web are God's way of warning you to not try to make use of the brass. Working that area of the case, thinning and work...
-
Might have to play with the OAL until they “plunk”….. What is your current OAL…? …and yes, you can crimp too tight, or not enough to...
-
mdi reacted to 1KPerDay's post in the thread .38 Special 148 grain wadcutter loads using Bullseye with
Like.
Your bullet has a crimp groove. Try using it and try some seated flush and see what your gun likes. The 2.7 WC loads are typically for...
-
-
Loading…
-
Loading…
-
Loading…