H
hunt127588
Latest activity Postings Images About
-
-
Hhunt127588 replied to the thread Best way to clean a Marlin 1894?.Remove the lever, bolt and ejector and clean from the rear. Clean it like you would any other rifle. I like to use a bore guide as well...
-
Hhunt127588 replied to the thread Alliant 2400 in .357 Mag.The issue may have been the Handgun setting on the LabRadar as opposed to using the Rifle velocity setting. The instructions note...
-
Hhunt127588 replied to the thread Alliant 2400 in .357 Mag.I agree with your statement. I'm using a LabRadar set on the pistol velocity setting and using acoustic setting (i.e. not using my JKL...
-
HI recently decided to try some Alliant 2400 in .357 Mag. I'm loading for both a 4" revolver and a 16.5" Henry Big Boy Carbine. Upon...
-
Hhunt127588 replied to the thread Remington 380.Mine had issues new out of the box. The trigger when pulled back would slip while pulling the hammer back and would let the hammer fall...
-
Hhunt127588 replied to the thread 30-30 loads..My most accurate loads in a JM Marlin 30-30 is a max load of IMR 3031 behind a 150 gr round nose. Also, a max load (per Hodgdon) of...
-
Hhunt127588 replied to the thread Considering a new action.It depends on what you're trying to achieve. If you're after smallest agg. groups, you probably need to consider the rifle type and the...
-
Hhunt127588 replied to the thread HS6 in 38/357 with 158 Grain Cast.8 lb in stock: https://www.brownells.com/reloading/components/powder/2400-smokeless-powder/
-
Hhunt127588 replied to the thread HS6 in 38/357 with 158 Grain Cast.For reference, I'm shooting Missouri 158 SWCs (18 BHN) w/ Hi-Tek coating out of a Taurus 66 4" in .357 Mag. With 8.5 gr of HS-6, I get...
-
Hhunt127588 replied to the thread Ruger PCC FTE.This hasn't been my experience with my Ruger PCC. I run 124 gr RMR MPRs with 5.1 gr CFE Pistol. I have jams all the time. I don't seem...
-
Hhunt127588 replied to the thread LE Wilson Case trimmer with micrometer worth the money?.I started with one and it is a quality piece of gear. However, trimming is one of the messiest and most time consuming jobs by the time...
-
Hhunt127588 replied to the thread Anderson AM-15?.I haven't found anything wrong with it. Tuned loads shoot about 1" @ 100 yards. Trigger is gritty but that can be replaced.
-
Hhunt127588 replied to the thread Removing Military crimp-- swage, ream?.Dillon Super Swager has worked well for me.
-
Hhunt127588 replied to the thread Carry Safety.That lady will forever live with the notion that her judgement and decision-making caused her to lose a child. I don't wish that on...
-
Hhunt127588 replied to the thread Is your measure gritty with H110?.I had the issue with the Lee. I switched to the Lyman Brass Smith and no more issues.
-
-
Loading…
-
Loading…
-
Loading…