BBBBill
Latest activity Postings Images About
-
-
BBBBill reacted to CapnMac's post in the thread How does improper cleaning ruin a barrel? with
Like.
Further, not letting a bunch of bored troopies in Boot Camp use steel rods down the barrel, 2x or 3x per day, to keep them busy will... -
I have been using Timney Triggers for over 50 years and never had a problem with one until this past month. I currently own 8 Model 70...
-
It came off. With the help of a pair of vice grips and 2 pieces brass from a .44 shell.And an idea from y'all. Thanks.
-
BBBBill replied to the thread Should be simple.To avoid crushing the lug/stud put a screw in the hole.
-
BBBBill reacted to a5werkes's post in the thread What gunsmithing or repairs have you done today with Like.
...........
-
BBBBill reacted to a5werkes's post in the thread What gunsmithing or repairs have you done today with Like.
This is a full-circle Sig P6 story. I acquired both a Sig P225 and its specialty variant the P6 in pristine form many years ago. The P6...
-
BBBBill reacted to Armorer 101's post in the thread Reboring a 22 for a Liner - What Do I Need To Know? with Like.
Bore the hole straight through with an extension on the liner drill, in a lathe. Do not drill it by hand, nor from each end. Start at...
-
I bet it does. I have a gauge to specifically check that gas key - lower receiver ring gap tolerances. A fancy two quarter test. There...
-
BBBBill reacted to Armorer 101's post in the thread What gunsmithing or repairs have you done today with Like.
Did some sanding on the new stock for the 358 Win conversion. Have the metal work done, inletting and glass bedding done, just need to...
-
BBBBill reacted to a5werkes's post in the thread What gunsmithing or repairs have you done today with Like.
.........
-
BBBBill reacted to a5werkes's post in the thread What gunsmithing or repairs have you done today with Like.
Yesterday, making a lathe center gauge for aligning 60 deg tool bit for single point thread fabrication. I have the Browning & Sharpe...
-
I would not modify a rare Rem M30 Express to a 404 Jefferies. Firstly, those are antique actions made of steels with lots of slag and...
-
Got my package. Very well packed. Very happy with the CS!
-
I hope this is the right place for this post…. The Daniel Defense CS team provided outstanding support, and I wanted to give them a...
-
BBBBill reacted to a5werkes's post in the thread What gunsmithing or repairs have you done today with Like.
Interesting demonstration of the how a small tap wrench is Not a precision instrument. You may want to consider avoid using the...
-
-
Loading…
-
Loading…
-
Loading…