ULTRADOT MATCH DOT II
I HAVE SEVERAL SLIDE MOUNTED ON 45's AND 9MM's . BEEN USING THEM FOR YEARS. LIFETIME WARRANTY.
https://ultradotusa.com/product/matchdot-ii-m/
ANOTHER VOTE FOR IMPERIAL. JUST A VERY LIGHT COAT FROM YOUR FINGER TIP. THE WARMTH OF YOUR FINGER MELTS TO THE PERFECT STATE TO BE APPLIED. I'VE USED IT FOR ALL RIFLE BRASS FOR EVER. JP
THAT'S A JOB BEST LEFT TO THE FACTORY. THESE ARE PRESS FIT INTO THE FRAME. WHEN ONE FALLS OUT AN OVERSIZE ONE NEEDS TO BE INSTALLED. CALL CUSTOMER SERVICE , THEY'LL SEND YOU A CALL TAG. JP
IF YOU SEARCH AROUND ON THE INTERNET YOU CAN FIND SAFETY GLASSES THAT HAVE THE READING LENS ON THE TOP OF THE GLASSES. THEY ALSO MAKE THEM WITH THE READING LENS ON THE TOP AND BOTTOM OF THE LENS. THIS LEAVES YOU REGULAR VISION IN-BETWEEN THE 2 READING SECTIONS. IN THE EYE WEAR BUSINESS THEY ARE...
I'M A LITTLE LATE ON THE CONVERSATION. BUT I HAVE TRAINED A OVER 2K FEMALES WITH PISTOLS. I REALLY BELIEVE THAT THE 9MM SHIELD OR THE RUGER LC9S ( NEVER IN MY LIFE DID I THINK I WOULD BE RECOMMENDING A RUGER) WOULD BE THE WAY TO GO. BOTH ARE VERY EASY SHOOTING. BOTH CARRY VERY EASY AND ARE EASY...
I AGREE WITH "SPATS". I TOO HAVE GOTTEN A 45 SHIELD.AND AM LOVING IT. I CARRYS EASILY. A DOWN RIGHT PLEASURE TO SHOOT. MINE LOVES THE OLD FEDERAL 45C LOAD. THAT'S THE 185GR HI-SHOK JHP BULLET AT 950FPS. MORE THAN ENOUGH BULLET TO MEET EVERY NEED. JP
ACTUALLY MOST POPULAR 148GR HBWC FOR PPC IS NO LONGER 2.7 GR BULLSEYE. IT 2.7 GR WST FOR HBWC, FOR 148GR DEWC'S 2.9GR WST. WST IS MUCH CLEANER. IT LEAVES LESS RESIDUE TO GET STUCK UNDER THE EXTRACTOR STARS.
TRAIL BOSS IS GAINING IN POPULARITY .
TIN STAR BY VV IS GREAT. IT'S THE CLEANEST BY FAR...
TRY 5.3 GR WSF. WSF IS A SHOTGUN POWDER , MADE TO BURN IN LONG BARRELS. YOU WILL GET WELL ABOVE 1200 FPS OUT OF A 16" RIFLE BARREL. WSF IS APPROVED BY WINCHWSTER FOR 9MM LOADING. JP
4.0 gr wsf with the hornady 147gr bullets is a very accurate rd at 50yds.
4.2 gr of vv330 is even better at 50yds
3.9 gr of vv320 is great and will give you 978 fps per vv data
I had a poured concrete vault put in my retirement home when i had it built. I have radiant heat in the floor and a 6" ac duct. I do run a dehumidifier during the summer months. I keep the room at 45% humidity year round.
A couple of suggestions.
1st. Build it twice as big as you think you...
OR BUT IT PRE-MIXED AT BROWNELLS. JP
http://www.brownells.com/gun-cleaning-chemicals/solvents-degreasers/bore-solvents/ed-s-red-bore-cleaner-prod19936.aspx
I've dealt with this before. Dump out the eds red. Pour in kroil the gunsmiths friend. You can than usually pull it out.
Stand the barrel up right , overnight . When yo see the kroil dripping past the casing your good to go. Normally that is. Jp
Another thing to look for. If you can remove the side plate? Take a look at the cylinder stop movement. The cylinder stop moves 4 ways. As previously stated make sure the spring is properly installed. The most common problem is the interior is dirty or gummy from dried oil or solvent. The...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.