I am progressing through a 1022 build for local benchrest matches and looking at aftermarket barrel options. One that intrigues me are the KSA barrels, mainly because they are advertised as a micro groove type of rifling which as we know can be quote accurate but has only ever been used by...
THAT IS A SMOKIN DEAL. I just ordered 2 cases, thanks for the tip.
The 40g standard velocity Super Extra is my absolute favorite "good enough" load for practice benchrest. Just yesterday I shot twelve 5 shot 50yd groups with this load in my Savage FVSR testing rim thickness sorting and the...
It as some kind of fouling and even after rimfire cleaner, JB bore paste and brake kleen intermixes with many many brush strokes a little remains. I don't know if we were seeing lead or bullet lube or if any of this will result in improved accuracy.
It's always just sorta maintained. BUT I didnt buy the rifle new. It's entirely possible a PO fouled the bore badly with 5 bricks of wildcat or "Surok"
I usually subscribe to the less is more camp of 22 bore cleaning so I may have never cleared it.
Now these Ruger pics are a little more interesting. There is a very pronounced crusty carbon ring present. The bore in approximately the middle 3rd has this strange to me appearance that seems to cast a shadow and looking had on almost looks crystalline like galvanized steel. Upon seeing this I...
New toy time in the form of an amazon bore scope. The thumbs in this reply are all the savage bore. By in large pretty uniform down the entire bore with a slight carbon ring. Of the two units this one actually has a bit rougher lede. This bore has 100 more rounds through it since the last...
In the past few years I have been casually dabbling in local rimfire benchrest competitions. Well today in the course of testing a couple of mods I made to my 10/22 my ruger and Savage FVSR ended up in an impromptu shoot off.
Both have stock barrels. Both are pillar bedded into Richards...
In my opinion we are staring down the barrel of pistol caliber carbines being the next big gun fad of the decade. Lever guns will be part of this but the fad this time will be a little broader based not just being about ONE platform like the AR and 1911 gun fad before it.
I've had a few of these over the years and still have one I'll never be parted from.
They shoot great if treated like a 30-30. If you are expecting to make a super 30-30 this isn't the rifle. All but the stubbiest spitzer bullets will be too long for the magazine anyway
As mentioned the...
What is the deal with folding and or takedown PCCs ?
Not once have I been like. This rifle would be better if it stored twice as thick in an awkward case size with the potential to lose half of it. Loosely attaching the barrel to the sighting device is for me too.
They get a bad rap at least in part because they tend to have been grossly oversized for many years and many calibers.
Microgroove rifling just catches the bad perception for borderline manufacturing defects that aren't really a fault of the rifling design
Throw in some dumb twist rate...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.